Telephone: +254 20 8000175/6

Mobile: +254 720 635153, +254 736 099227

Studer Innotec XTM 4000-48

Make an Inquiry

$2,180.00

The inverter/charger has a continuous power rating of 3.5kVA up to an ambient temperature of 40°C. In addition, it has a 30 minute power rating of 4kVA, and can deliver 10.5kVA for up to 5 seconds! Thanks to this very high surge power capacity, it can supply without worries loads with a high start-up current.

The battery charge current can be adjusted between 0 and 50Adc. The factory default settings include a battery charge curve best suited for lead acid batteries with gelled electrolyte (GEL). This battery charge curve can be easily adapted to other types of batteries including OPzS, NiFe, Lithium and Redox Flow, to name but a few.

The transfer system is active when an AC power source (generator, public grid, shore power…) is available at the AC input of the Xtender. The transition between inverter and transfer mode is achieved without any power cut and allows up to 50Aac of current to pass through to the loads. Similarly, the transition between transfer and inverter mode is extremely fast (max 15ms), which makes the Xtender suitable for many UPS (uninterruptable power supply) applications.
Inverter, charger and transfer relay

The Xtender basically works as an inverter and as a charger, combined with a transfer relay.

Product Enquiry
Contact Form

Description

Detailed information on all Suder Innotec XTM 4000-48 and Xtender accessories can be found here at Center for Alternative Technologies, Nairobi, Kenya
The Xtender communication bus is shared with the MPPT solar charge controllers of the VarioTrack and VarioString series. Inverters and charge controllers are synchronized to ensure an optimum charge of the battery and use of available energy.